Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Quarter Glass on a Chevrolet Enjoy

Model: Chevrolet Enjoy MK 1 - Years 2010-2022
Part: Body

A seemingly difficult task: replacing the rear quarter glass on your Chevrolet Enjoy. Temporarily, in the video, it was covered with a thick layer of tape to prevent the glass from breaking. Now it is being replaced, but the most delicate part is removing all the small broken glass pieces and the unpleasant marks left by the tape. Remove the damaged seals from the old glass. This is the longest and most unpleasant task. Clean the body parts thoroughly. Reapply double-sided tape on the clips, position them, and apply silicone all around the glass to be installed. Now you can place it using the appropriate applicators. Ensure that the clips fit into their slots. Allow it to dry properly by holding the glass with some painter's tape. Job completed.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Chevrolet Enjoy?
How to Change the Engine Oil on the Chevrolet Enjoy?
Chevrolet Enjoy (2010-2022 / MK 1) To change the engine oil on the Chevrolet Enjoy, access the underside of the vehicle to unscrew the drain plug from the oil pan. Collect the used oil…
How to Replace the Front Brake Pads on a Chevrolet Enjoy?
How to Replace the Front Brake Pads on a Chevrolet Enjoy?
Chevrolet Enjoy (2010-2022 / MK 1) To replace the front brake pads on a Chevrolet Enjoy, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, re…
Replacing the Front Wheel Bearing on the Chevrolet Enjoy
Replacing the Front Wheel Bearing on the Chevrolet Enjoy
Chevrolet Enjoy (2010-2022 / MK 1) Today, you will see how to disassemble and replace the front wheel bearing on the Chevrolet Enjoy in this brief and simple guide. First, lift the veh…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos