Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Blazer
  6. : Replacing the fuel filter in a Chevrolet Blazer

Chevrolet Blazer - Video tutorial

Model: Chevrolet Blazer - Years 1998-2005
Part: Petrol filter
Operation: Replacing the fuel filter in a Chevrolet Blazer

We can replace the fuel filter in a Chevrolet Blazer, following a few simple steps: the first thing to do is to lift the car using a hydraulic jack and put on safety stands. Use protective gloves and goggles to protect yourself from petrol splashes. Place a container under the gasoline filter to collect the gasoline that escapes; use an American wrench and a 6mm wrench to unscrew the nuts of the fuel lines in the filter. Once the nuts have been unscrewed, we can remove the old petrol filter and then we can install the new petrol filter in place (position the filter following the directions of the arrow on the filter itself).


Posted on 14 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos