Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : How to replace the gear knob on the Chevrolet Cruze

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Gear Shift Knob
Operation: How to replace the gear knob on the Chevrolet Cruze

To replace the old gear knob of your Chevrolet Cruze (year 2009-2015) it takes very few seconds. Below we will find out how to do it together. First, turn off the car completely and park it safely so that you can carry out the entire operation without any dangers. Immediately afterwards, remove the old knob by turning it counter-clockwise. Once this is done, mount the new knob by simply turning it clockwise. When finished, check for any lateral play and make a few test shifts to make sure everything is in place.


Posted on 8 November 2022 by ScegliAuto



Replacing the gaiter and gear knob on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video we will see the steps that will allow us to disassemble and replace the headset and gear knob on the first series Chevrolet Cruze. Firs
How to remove the knob of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Do you want to replace the gear knob on your Chevrolet Cruze? Let's see how to proceed in this video. Disconnect the frame of the leather cap with a
How do I remove the gear knob on Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) How do you remove the knob on the Chevrolet Cruze? We disassemble the knob to replace it or to replace the leather cap that covers the shaft. We take

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos