Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. : Epica : Where is the fuse box of the Holden Epica located?

Chevrolet Epica - Video tutorial

Model: Chevrolet Epica MK 1 - Years 2005-2011
Part: Fuse box
Operation: Where is the fuse box of the Holden Epica located?

If you don't know where the fuses are located in your Holden Epica, don't worry because in the following guide you will find all the necessary instructions to locate them in a few seconds and in total safety. First of all, make sure you have parked the car on a flat road and have turned it off completely. At this point, open the driver's side door and remove the plastic panel located at the end of the dashboard. Once you have removed the panel in question, all you have to do is locate the fuses you were looking for and the procedure is complete.


Posted on 11 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos