Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. : Epica : How to replace the pollen filter on Chevrolet Epica.

Chevrolet Epica - Video tutorial

Model: Chevrolet Epica MK 1 - Years 2005-2011
Part: Cabin air filter
Operation: How to replace the pollen filter on Chevrolet Epica.

In this video tutorial we can see how it is possible to replace the pollen filter on Chevrolet Epica, following a few simple steps: the cabin filter must be replaced every 15,000 km or at least once a year. The first thing to do is to purchase a new pollen filter; next step you have to get in the car and turn off the car and apply the handbrake. The cabin filter on this car can be found inside the engine compartment, so we have to lift the engine hood and secure it with a special rod. With a flat-blade screwdriver you have to remove the windshield wipers and remove the pins on each side. Remove the ventilation cover on the passenger side, without pulling it out completely. Remove the old cabin filter and fit the new cabin filter.


Posted on 11 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos