Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Layout and Diagram for a Chevrolet Sail

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

In this video, you can see the layout and diagram of the fuses on the Chevrolet Sail. This vehicle is based on the Opel Corsa B and is marketed in South America, Africa, and the Middle East: the main fuse box is located under the dashboard on the driver's side, behind a protective cover.

In this box, you will find the fuse for the cigarette lighter - which is also a power outlet - and it is fuse 18 rated at 20 amps: this fuse also controls the reverse lights, speedometer, rear window defroster, and optional heated seats.

An additional relay box is located above the glove compartment, while in the engine compartment, you will find a box on the left shock absorber strut.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Chevrolet Sail (2010-2017 / MK 2) In this video, you will see the location of the fuse boxes for the Chevrolet Sail (the Aveo has the same fuse box location). The fuse box located in …
Chevrolet Sail (2010-2017 / MK 2) The Chevrolet Sail has one fuse box inside. The box is located within the cabin, specifically between the steering column and the driver's door at th…
Chevrolet Sail (2010-2017 / MK 2) To locate the fuses in a Chevrolet Sail, open the driver’s door and find the access panel located at the bottom of the dashboard, near the steering w…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos