Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. :
  3. Chrysler Vari
    4. : Warning light – error code

Chrysler Chrysler Various - Warning light – error code

Warning Light – Error Code Chrysler Chrysler Various ( / )

Chrysler Chrysler Various
How to Reset Uconnect in the Chrysler Pacifica 8.4
In this video, you will learn how to reset Uconnect in the Chrysler Pacifica 8.4. Enter the cabin and direct your gaze to the dashboard between the two …Read all…
Posted on 12 September 2026 by ScegliAuto
Chrysler Chrysler Various
How to Reset the ECU on Chrysler, Dodge, Jeep Cars
Today, you will learn a simple yet clever trick to reset the car's ECU at no cost. Switch off the car, engage the handbrake, and remove the ignition key. Then, …Read all…
Posted on 20 June 2026 by ScegliAuto
Chrysler Chrysler Various
Reset Airbag Light on Jeep, Fiat, Dodge, and Chrysler Cars
In this tutorial, you will learn a method to reset the airbag light, but it is still advisable to take the car to a workshop to check for any actual …Read all…
Posted on 30 May 2026 by ScegliAuto
Body (1) Key (1) Checks and maintenance (1) Fuel injectors (1) Tail light bulb (1) Antifreeze coolant (1) Pump (1) Fuse box (2) Door lock (1) Side mirror (1) Warning light – error code (3) Service warning light (1) Windshield washer nozzle (1) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos