Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Uconnect in the Chrysler Pacifica 8.4

Model: Chrysler Chrysler Various
Part: Warning light – error code

In this video, you will learn how to reset Uconnect in the Chrysler Pacifica 8.4. Enter the cabin and direct your gaze to the dashboard between the two passengers. In this area, you will find several controls. At the top is the onboard computer from which you can manage various vehicle functions, including the radio, car maintenance system, etc. Below, you will find various controls related to air conditioning, ventilation, etc. In the centre of these two main consoles, there are two potentiometers positioned parallel to each other. Press and hold them for a few seconds, as shown in the video, until the onboard computer indicates that the reset has been completed.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Chrysler Town & Country
How to Reset the Oil Light on a Chrysler Town & Country
Chrysler Chrysler Various If the warning light for the oil change appears on the dashboard of your Chrysler Town & Country, you must perform a manual reset. To do this, insert…
Where are the fuses located in the Chrysler Town & Country?
Where are the fuses located in the Chrysler Town & Country?
Chrysler Chrysler Various The fuses of the Chrysler Town & Country are located in the only box installed on the vehicle: in this type of car, you can find the box inside the e…
Removing the External Wing Mirror on a Chrysler 300c
Removing the External Wing Mirror on a Chrysler 300c
Chrysler Chrysler Various In this video tutorial, learn how to remove and replace the external wing mirror on a Chrysler 300c by following these simple and quick steps. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos