Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Windscreen Wiper Fuse in a Chrysler Town?

Model: Chrysler Chrysler Various
Part: Checks and maintenance

Video tutorial

If the windscreen wipers on your Chrysler Town have suddenly stopped working, first check the status of the relevant fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, specifically under the black plastic cover near the battery.

It is labelled J21 and is the first column on the left when looking at the box from the front. If faulty, ensure you replace it with a spare of the same specifications and work with the vehicle switched off.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located on the Chrysler Town & Country?
Where Are the Fuses Located on the Chrysler Town & Country?
Chrysler Chrysler Various The fuses for the Chrysler Town & Country are located in the only box installed on the vehicle: in this type of car, you can find the box inside the …
How to replace the rear tailgate lock in the Chrysler Town & Country?
How to replace the rear tailgate lock in the Chrysler Town & Country?
Chrysler Chrysler Various In this tutorial we can see how to replace the rear hatch lock in the Chrysler Town & Country, an extremely simple and quick operation. First of all,…
How to Reset the Oil Light on a Chrysler Town & Country
How to Reset the Oil Light on a Chrysler Town & Country
Chrysler Chrysler Various If the warning light for the oil change appears on the dashboard of your Chrysler Town & Country, you must perform a manual reset. To do this, insert…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos