Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Chrysler Town & Country

Model: Chrysler Chrysler Various
Part: Service warning light

If the warning light for the oil change appears on the dashboard of your Chrysler Town & Country, you must perform a manual reset. To do this, insert the key and turn it to position one to activate the ignition only. Immediately after, press the accelerator pedal three times in quick succession within ten seconds. Once a confirmation message appears on the display, turn the key counterclockwise and switch off the ignition. At this point, the oil light reset is complete, but if there are errors, you can repeat the entire operation from the beginning.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Chrysler Town & Country?
Where are the fuses located in the Chrysler Town & Country?
Chrysler Chrysler Various The fuses of the Chrysler Town & Country are located in the only box installed on the vehicle: in this type of car, you can find the box inside the e…
How to replace the rear tailgate lock in the Chrysler Town & Country?
How to replace the rear tailgate lock in the Chrysler Town & Country?
Chrysler Chrysler Various In this tutorial we can see how to replace the rear hatch lock in the Chrysler Town & Country, an extremely simple and quick operation. First of all,…
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Chrysler Chrysler Various If the windscreen wipers on your Chrysler Town have suddenly stopped working, first check the status of the relevant fuse, the location of which is i…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos