Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Chrysler 200

Model: Chrysler Chrysler Various
Part: Key

The following procedure can be easily performed by all owners of a Chrysler 200 or 300. In fact, the smart key model is almost identical, and consequently, the battery replacement involves the same steps. First, press the small button located at the top of the cover and pull out the physical emergency key. Next, using the same key, gently pry and remove the cover. Right underneath, you will have access to the old button cell battery. Replace it with a new one, and finally, correctly refit the cover. Don’t forget to reinsert the physical key as well.

Updated on 8 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Windscreen Washer Jet on a Chrysler 200?
How to Replace the Windscreen Washer Jet on a Chrysler 200?
Chrysler Chrysler Various To replace the windscreen washer jet on a Chrysler 200, lift the bonnet and locate the old jet. This will be found in the part of the bonnet directly…
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Chrysler Chrysler Various If the windscreen wipers on your Chrysler Town have suddenly stopped working, first check the status of the relevant fuse, the location of which is i…
How to Reset the ECU on Chrysler, Dodge, Jeep Cars
How to Reset the ECU on Chrysler, Dodge, Jeep Cars
Chrysler Chrysler Various Today, you will learn a simple yet clever trick to reset the car's ECU at no cost. Switch off the car, engage the handbrake, and remove the ignition …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos