Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Jet on a Chrysler 200?

Model: Chrysler Chrysler Various
Part: Windshield washer nozzle

Video tutorial

To replace the windscreen washer jet on a Chrysler 200, lift the bonnet and locate the old jet. This will be found in the part of the bonnet directly beneath the windscreen and will be connected to hoses that need to be disconnected. Once removed, extract the old jet by pushing it upwards.

At this point, insert the new jet into the appropriate housing and connect it to the hoses that will allow the washer fluid to pass through. Once the operation is complete, close the bonnet and check the correct operation of the jet.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Chrysler 200
Chrysler Chrysler Various The following procedure can be easily performed by all owners of a Chrysler 200 or 300. In fact, the smart key model is almost identical, and consequ…
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Chrysler Chrysler Various If the windscreen wipers on your Chrysler Town have suddenly stopped working, first check the status of the relevant fuse, the location of which is i…
Where Are the Fuses Located on the Chrysler Town & Country?
Where Are the Fuses Located on the Chrysler Town & Country?
Chrysler Chrysler Various The fuses for the Chrysler Town & Country are located in the only box installed on the vehicle: in this type of car, you can find the box inside the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos