Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Mirror on a Chrysler 300

Model: Chrysler 300c MK 1 - Years 2004-2011
Part: Side mirror

Is the external mirror broken? Here's how to remove it. Use a lever to detach the part of the internal trim panel (there are plastic clips) and unscrew the securing bolts with a socket spanner. Once the securing bolts are removed, take the mirror with the electrical wires for the glass adjustment out of the car door. For reassembly, remove the coloured cap from the old mirror and refit it onto the new one. Install the mirror with the bolts, adjustment wires, and plastic cover into the door panel. Finally, reattach the door panel.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chrysler 300
How to reset the oil light on the Chrysler 300
Chrysler 300c (2011-2023 / MK 2, LD) If you own a second series Chrysler 300 and want to find out the steps you need to take to complete the manual reset procedure of the engine oil ligh…
Removing the Interior Light Fitting on a Chrysler 300
Removing the Interior Light Fitting on a Chrysler 300
Chrysler 300c (2004-2011 / MK 1) Are the bulbs in the interior light fitting blown? Here’s how to remove the light fitting from a Chrysler 300. Using a screwdriver or a plastic lever…
How to replace the door lock on the Chrysler 300?
How to replace the door lock on the Chrysler 300?
Chrysler 300c (2004-2011 / MK 1) To replace the door lock on the Chrysler 300, loosen the screws securing the door from the bottom, along with the corresponding rivets. Once all thes…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos