Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Aircross
    4. : Cabin air filter

Citroen C3 Aircross - Cabin air filter

Citroen C3 Aircross (2017-2024 / MK 1)
How do you replace the cabin filter of the Citroën C3 Aircross?
To replace the cabin filter of the Citroën C3 Aircross, you need to open the hood so that you can access the seal located immediately under the windshield. …read all…
Posted on 25 May 2023 by ScegliAuto
Citroen C3 Aircross (2017-2024 / MK 1)
Cabin filter replacement on Citroen C3 Aircross
Lift the hood and put on the special support rod. Move the gasket near the windshield, in order to remove the round fixing clips placed behind it. They have …read all…
Posted on 25 January 2024 by ScegliAuto
Citroen C3 Aircross (2017-2024 / MK 1)
Cabin air filter replacement on Citroen C3 Aircross
Changing the cabin filter on this car is very quick and easy. First open the bonnet and on the upper right side you will notice a grille with ventilation …read all…
Posted on 16 November 2023 by ScegliAuto
Car stereo (1) Battery (1) -board computer (3) Checks and maintenance (21) Dashboard (1) Air filter (2) Cabin air filter (3) Petrol filter (1) Headlight bulb (4) Tires (2) Door (1) Instrument cluster (4) Fuse box (3) Seat (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos