Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Aircross
    4. : -board computer

Citroen C3 Aircross - -board computer

Citroen C3 Aircross (2017-2024 / MK 1)
How to perform a service reset on Citroen C3 Aircross
In this video tutorial we can see how you can reset the service warning light on Citroen C3 Aircross, by following a few simple steps that will guide you …read all…
Posted on 20 November 2022 by ScegliAuto
Citroen C3 Aircross (2017-2024 / MK 1)
How to reset the TPMS warning light on the Citroen C3
The TPMS sensor has been introduced in cars for some years and since its first appearance, it has certainly brought enormous advantages both from the point of …read all…
Posted on 23 August 2022 by ScegliAuto
Citroen C3 Aircross (2017-2024 / MK 1)
How to reset the Citroen C3 Aircross service light
If you want to eliminate the service warning light from the on-board computer display of your Citroen C3 Aircross it really takes a matter of seconds. In fact, …read all…
Posted on 2 April 2024 by ScegliAuto
Car stereo (1) Battery (1) -board computer (3) Checks and maintenance (21) Dashboard (1) Air filter (2) Cabin air filter (3) Petrol filter (1) Headlight bulb (4) Tires (2) Door (1) Instrument cluster (4) Fuse box (3) Seat (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos