Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Citroën C3 AirCross?

Model: Citroen C3 Aircross MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter of the Citroën C3 Aircross, you need to open the hood so that you can access the engine compartment: in its rear part, just below the windshield, you will be able to locate a covering panel. You will need to lift this panel on the passenger side: underneath you will find the cabin filter that needs to be completely removed.

After removing the old filter, you can insert the new one, then reposition the panel and close the hood.


Posted on 7 March 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Citroën C3 Aircross?
How to Replace the Cabin Filter on a Citroën C3 Aircross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the cabin filter on a Citroën C3 Aircross, open the bonnet to access the seal located immediately below the windscreen. Once this seal is …
Replacing the Cabin Filter on a Citroen C3 Aircross
Replacing the Cabin Filter on a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Lift the bonnet and insert the support rod. Move the seal near the windscreen to remove the round clips securing it. These clips hold the cabin air f…
How to Replace the Cabin Air Filter in the Citroen C3 Aircross
How to Replace the Cabin Air Filter in the Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) In today's video, you will see how to replace the cabin air filter in the Citroen C3 Aircross. First, park the car and let it rest to cool down the e…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos