Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Citroen C3 Aircross

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Air filter

In today's video, you will see how to replace the cabin air filter in the Citroen C3 Aircross. First, park the car and let it rest to cool down the engine bay. Now, open the bonnet using the lever located inside the cabin. Once done, proceed to remove the dust covers located between the windscreen and the engine bay, then extract the worn air filter. After this, clean the installation area and insert a new filter of the same type, then close everything up and finish.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seat of a Citroen C3 Aircross
How to Fold Down the Rear Seat of a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Before you can start, open the rear door of your Citroen C3 Aircross. Begin by pulling towards you the latch located at the lower outer corner of the…
Where to Find the Fuse Box of the Citroen C3 Aircross 2020
Where to Find the Fuse Box of the Citroen C3 Aircross 2020
Citroen C3 Aircross (2017-2024 / MK 1) If you have a 2020 Citroen C3 Aircross and want to find out where the fuse box containing all the various fuses is located, carefully read the follow…
How to Replace the Cabin Filter on a Citroën C3 Aircross?
How to Replace the Cabin Filter on a Citroën C3 Aircross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the cabin filter on a Citroën C3 Aircross, open the bonnet to access the seal located immediately below the windscreen. Once this seal is …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos