Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3 Picasso
  6. : Front bumper

Citroen C3 Picasso - Front bumper

Citroen C3 Picasso (2008-2017 / MK 1)
How to disassemble the front bumper of a Citroen C3 Picasso?

Good morning, the goal for today is to remove the front bumper of our Citroen C3 Picasso. Let's start by lifting the car with a jack, in order to create enough …read all…
Posted on 10 March 2024 by ScegliAuto

Car stereo (2) Battery (6) Spark plugs (1) Key (1) -board computer (2) Checks and maintenance (18) Brake discs (1) Tail light (3) Air filter (4) Cabin air filter (2) Oil filter (2) Light bulb (2) Headlight bulb (5) Rear light bulb (4) License plate light (1) Window motor (1) Engine oil (1) Door panel (2) Front bumper (1) Tires (2) Gear Shift Knob (3) Fuel pump (1) Instrument cluster (3) Wheel (1) Fuse box (10) Lock (1) Drums and shoes (1) Windscreen wipers (5) Steering rods (1) Side window (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos