Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Picasso
    4. : Rear light bulb

Citroen C3 Picasso - Rear light bulb

Citroen C3 Picasso (2008-2017 / MK 1)
How to replace the rear headlight bulb of a Citroen C3 Picasso?
Before starting, we need to open the rear hatch of our Citroen C3 Picasso. We begin by unscrewing and removing the screws that secure the rear light to its …read all…
Posted on 29 February 2024 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to change the third brake light bulbs on the Citroen C3 Picasso
In this video tutorial we will see the steps that will allow us to remove the third stop and replace the bulbs on the Citroen C3 Picasso. First we open the …read all…
Posted on 7 March 2024 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to replace the rear light bulb on a Citroen C3 Picasso
Before we can start, we will have to go and open the tailgate of our Citroen C3 Picasso. So let's start by unscrewing and removing the Torx screws that secure …read all…
Posted on 4 January 2024 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to replace rear brake light bulbs Citroen C3 Picasso
The replacement of the rear light bulbs is very simple to do by yourself even though you have to disassemble the light itself; therefore open the rear hood and …read all…
Posted on 23 September 2023 by ScegliAuto
Car stereo (2) Battery (6) Spark plugs (1) Key (1) -board computer (2) Checks and maintenance (18) Brake discs (1) Tail light (3) Air filter (4) Cabin air filter (2) Oil filter (2) Light bulb (2) Headlight bulb (5) Rear light bulb (4) License plate light (1) Window motor (1) Engine oil (1) Door panel (2) Front bumper (1) Tires (2) Gear Shift Knob (3) Fuel pump (1) Instrument cluster (3) Wheel (1) Fuse box (10) Lock (1) Drums and shoes (1) Windscreen wipers (5) Steering rods (1) Side window (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos