Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Picasso
    4. : -board computer

Citroen C3 Picasso - -board computer

Citroen C3 Picasso (2008-2017 / MK 1)
Where is the fuse for the onboard computer located in the Citroen C3 Picasso?
In case the onboard computer of our Citroen C3 Picasso suddenly stops working, we can first check the status of the corresponding fuse and, if necessary, …read all…
Posted on 3 April 2023 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to reset the oil warning light on Citroen Picasso
In this video tutorial you can see how it is possible to reset the oil warning light on Citroen Picasso through a procedure that will guide you step by step …read all…
Posted on 1 October 2022 by ScegliAuto
Car stereo (2) Battery (6) Spark plugs (1) Key (1) -board computer (2) Checks and maintenance (18) Brake discs (1) Tail light (3) Air filter (4) Cabin air filter (2) Oil filter (2) Light bulb (2) Headlight bulb (5) Rear light bulb (4) License plate light (1) Window motor (1) Engine oil (1) Door panel (2) Front bumper (1) Tires (2) Gear Shift Knob (3) Fuel pump (1) Instrument cluster (3) Wheel (1) Fuse box (10) Lock (1) Drums and shoes (1) Windscreen wipers (5) Steering rods (1) Side window (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos