Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3 Picasso
    4. : Headlight bulb

Citroen C3 Picasso - Headlight bulb

Citroen C3 Picasso (2008-2017 / MK 1)
How to replace the headlight bulb on a Citroen C3 Picasso
Before starting, we will have to open the front hood of our Citroen C3 Picasso. So let's start by disconnecting the plug that powers the burnt out light bulb, …read all…
Posted on 13 January 2024 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to replace headlight bulbs on Citroà «n C3 Picasso
Replacing the bulbs on the Citroà «n C3 Picasso is very simple thanks to the elevated position of the headlights and the fairly wide access points. In fact, …read all…
Posted on 18 November 2023 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to replace light bulbs on Citroen c3
Let's see how to change the headlight bulbs of a Citroen C3: open the front hood by pulling the lever located at the bottom right of the dashboard, let's put …read all…
Posted on 25 October 2023 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
How to replace the headlight bulb on Citroen C3 picasso
The replacement of the headlight bulb (H7 socket) is quite simple to carry out and the headlight does not have to be removed since there is enough room for …read all…
Posted on 19 September 2023 by ScegliAuto
Citroen C3 Picasso (2008-2017 / MK 1)
Headlight bulb replacement
Once the front hood has been opened and secured with the support rod, there is enough space inside the engine compartment to replace the bulb without removing …read all…
Posted on 6 August 2023 by ScegliAuto
Car stereo (2) Battery (6) Spark plugs (1) Key (1) -board computer (2) Checks and maintenance (18) Brake discs (1) Tail light (3) Air filter (4) Cabin air filter (2) Oil filter (2) Light bulb (2) Headlight bulb (5) Rear light bulb (4) License plate light (1) Window motor (1) Engine oil (1) Door panel (2) Front bumper (1) Tires (2) Gear Shift Knob (3) Fuel pump (1) Instrument cluster (3) Wheel (1) Fuse box (10) Lock (1) Drums and shoes (1) Windscreen wipers (5) Steering rods (1) Side window (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos