Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Cactus
    4. : Fuse box

Citroen Cactus - Fuse box

Citroen Cactus (2014-2020 / MK 1)
Where are the fuses located in the Citroën C4 Cactus?
The fuses of the Citroën C4 Cactus are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it is possible to …read all…
Posted on 3 March 2024 by ScegliAuto
Citroen Cactus (2014-2020 / MK 1)
What is the fuse diagram for the Citroen C4 Cactus?
If the devices of our Citroen C4 Cactus have suddenly stopped working, we can first of all check the status of the corresponding fuses, the diagrams of which …read all…
Posted on 22 January 2024 by ScegliAuto
Citroen Cactus (2014-2020 / MK 1)
What is the fuse layout of the Citroen C4 Cactus?
In this video, we can see where the fuse boxes of the Citroen C4 Cactus are located and what their respective diagrams are, to consult in case we need to check …read all…
Posted on 1 September 2023 by ScegliAuto
Loudspeaker (1) Car stereo (2) Battery (4) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (6) Checks and maintenance (21) Tail light (1) Air filter (1) Cabin air filter (1) Headlight bulb (3) Rear light bulb (1) Engine oil (1) Front bumper (1) Tires (2) Instrument cluster (1) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos