Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Cactus
    4. : Headlight bulb

Citroen Cactus - Headlight bulb

Citroen Cactus (2014-2020 / MK 1)
How to replace the front headlight bulbs in the Citroen C4 Cactus?
In this tutorial, we can see how to replace the front headlight bulbs in the Citroen C4 Cactus, an extremely simple and quick operation. First of all, make …read all…
Posted on 2 March 2024 by ScegliAuto
Citroen Cactus (2014-2020 / MK 1)
How to replace a headlight bulb on Citroen C4 Cactus
In this video we will see how to remove and replace the headlight bulb on a Citroen C4 Cactus, following the instructions below. First of all we open the …read all…
Posted on 15 January 2024 by ScegliAuto
Citroen Cactus (2014-2020 / MK 1)
C4 Cactus headlight bulb replacement
How to replace the headlight bulbs of a Citroen Cactus? Let's see how the damaged bulbs are removed from inside the headlights. We raise the front hood. Once …read all…
Posted on 14 January 2024 by ScegliAuto
Loudspeaker (1) Car stereo (2) Battery (4) Key (3) Timing belt (1) Air conditioning controls (1) -board computer (6) Checks and maintenance (21) Tail light (1) Air filter (1) Cabin air filter (1) Headlight bulb (3) Rear light bulb (1) Engine oil (1) Front bumper (1) Tires (2) Instrument cluster (1) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos