Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a Citroen C4 Cactus?

Model: Citroen Cactus MK 1 - Years 2014-2020
Part: Headlight bulb

In this tutorial, you will learn how to replace the front headlight bulbs on a Citroen C4 Cactus, a very simple and quick operation. First, ensure the key is not inserted, then open the bonnet, locate the large cap at the back of the headlight in question, and unscrew it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. Finally, insert the new bulb, avoiding touching the glass with bare hands, and follow the reverse procedure.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulb on Citroen C4 Cactus
Replacing Headlight Bulb on Citroen C4 Cactus
Citroen Cactus (2014-2020 / MK 1) How do you replace the headlight bulbs on a Citroen Cactus? Let's see how to remove the damaged bulbs from inside the headlights. Lift the bonnet. On…
Where are the Fuses Located on a Citroën C4 Cactus?
Where are the Fuses Located on a Citroën C4 Cactus?
Citroen Cactus (2014-2020 / MK 1) The fuses on a Citroën C4 Cactus are located inside the designated fuse boxes installed on the vehicle. In this type of vehicle, you can find two box…
How to Replace the Front Headlight Bulb on Citroen C4 Cactus
How to Replace the Front Headlight Bulb on Citroen C4 Cactus
Citroen Cactus (2014-2020 / MK 1) In this video, you will see how to remove and replace the front headlight bulb on a Citroen C4 Cactus, following the instructions below. First, open …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos