Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan and resistor of the Citroen DS5

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Blower motor

In this guide, we will see the instructions that will allow us to disassemble and replace the cabin fan and resistor of the Citroen DS5. First, we open the front door on the driver's side and start removing the plastic partition located above the pedals; inside, we find the cabin fan, where we will unscrew the fixing screws and disconnect the electrical connector to remove it, as shown in the video. At this point, we also remove the fan resistor, replacing it with the new one; if necessary, we replace the cabin fan, reassembling everything!

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located in the Citroen DS5?
Where is the OBD2 port located in the Citroen DS5?
Citroen Ds5 (2011-2019 / MK 1) If you want to have access to the OBD2 port located inside your Citroen DS5, all you have to do is follow the steps described below. First, enter the…
Where are the fuses of the Citroën DS5 located?
Where are the fuses of the Citroën DS5 located?
Citroen Ds5 (2011-2019 / MK 1) The fuses of the Citroën DS5 are contained inside specific fuse boxes that are installed on the vehicle: in this type of car it is possible to find t…
What is the fuse diagram for the Citroen DS5?
What is the fuse diagram for the Citroen DS5?
Citroen Ds5 (2011-2019 / MK 1) If some devices in your Citroen DS5 have suddenly stopped working, first check the status of the relevant fuses, as indicated in this video. Locate t…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos