Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the third brake light bulb of the 2015 Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Tail light bulb

The steps to replace the rear headlight bulb of the 2015 Citroën C3 are simple and quick to do independently. The first step is to open the trunk and remove the side carpet. The second step is to release the internal cover to access the internal compartment. The third step is to disconnect the headlight connector and unscrew the screw to remove it from the outside. After removing the headlight, open the dome light cover. The fourth step is to replace the bulbs using 12 volt bulbs. After inserting the bulbs, close the dome light cover. The fifth step is to insert the headlight on the outside and connect the connector on the inside. Screw in the screw and close the cover. The sixth step is to install the carpet and test the bulb. To replace the left rear headlight bulb, follow the same steps.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) Before you start, open the boot of your Citroen C3. Begin by unscrewing and removing the screws that secure the third brake light, accessing them thr…
Citroen C3 (2009-2016 / SC) As we can see, it is possible to change the third brake light and the license plate light at the same time on the Citroen C3. To remove the license p…
Citroen C3 (2009-2016 / SC) In this short video, you will learn how to remove and replace the third brake light or its bulbs on the Citroen C3 second series. First, open the boo…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos