Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light of the Citroen C3 MK2

Model: Citroen C3 SC - Years 2009-2016
Part: Light bulb

In this short video, you will learn how to remove and replace the third brake light or its bulbs on the Citroen C3 second series. First, open the boot and start by removing the plastic caps from the interior of the third brake light. Then, detach the third brake light to remove it from the outside, as shown in the video. At this point, you will be able to access the bulbs for replacement; disconnect the electrical connector to replace the entire third brake light unit. For reassembly, simply apply the reverse procedure!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light from a Citroen C3
How to Remove the Third Brake Light from a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you start, open the boot of your Citroen C3. Begin by unscrewing and removing the screws that secure the third brake light, accessing them thr…
How to Remove the Third Brake Light on a Citroen C3
How to Remove the Third Brake Light on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Watch this video to learn how to remove the third brake light on a Citroen C3. Remove the plastic cap inside the boot using a screwdriver (if present…
How to replace the third brake light bulb on the Citroen C3
How to replace the third brake light bulb on the Citroen C3
Citroen C3 (2009-2016 / SC) The replacement of the third brake light of the Citroen C3 is a very simple operation that can be carried out independently thanks to our short video…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos