Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3
  6. : How to remove the door panel of the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Door panel
Operation: How to remove the door panel of the Citroen C3

To disassemble the door panel of the Citroen C3 it is necessary, first of all, to carefully remove the chromed plastic molding using a screwdriver. Below we find two screws that we can unscrew using an electric unscrewer. Now we can unscrew the three screws that lock the panel laterally and at the bottom as shown in the images. At this point we can, using a small crowbar, lever the panel itself, at the bottom and side, to disengage it from the clips. Now we grab the panel from the bottom and push up and free the panel itself. We disconnect the power supply of the switches and that's it.


Posted on 20 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos