|
Do it yourself
| |||
| ||||
How to replace the diesel filter on a Citroen C3 MK2
Model: Citroen C3
SC
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
In this video we will see how to replace the diesel filter on a Citroen C3 HDi: we open the hood and remove the engine cover: we will be able to see the diesel filter, and we will start by disconnecting the electrical connector, then we disconnect the clips from the supply and return pipes, then we unscrew the two 8 mm screws that hold the filter in place and remove it from its housing. Now we need to use a basin, because we need to separate the filter from the cartridge: we unscrew the drain located under the filter, rotating the central connector to the right and lifting it. Now the diesel contained in the filter will pour into the basin. We unscrew the three screws located on the top of the cover, separating the cartridge from the cover. Clean the cover with a cloth and place it on the new cartridge, rotating it counterclockwise; then we put back the three fixing screws. Put the filter back in its housing, securing it with the 8 mm screws, then reconnect the pipes and finally the electrical connector. Put the engine cover back in place and the operation is complete.
Posted on 17 March 2025 by ScegliAuto
Related tutorials
Citroen C3
(2002-2009 /
FC, FN)
Today we will explain how to replace the diesel filter of the Citroen C3, model from 2005. To perform the replacement of the filter, we open the fron…
Citroen C3
(2016-2023 /
SY, SX)
To replace the fuel filter on the Citroën C3, access the underside of the vehicle. Near the fuel tank, you will find the fuel filter, which can be re…
Citroen C3
(2009-2016 /
SC)
To replace the fuel filter on the Citroën C3, you need to open the hood to locate the filter box, which will be found in the upper left part compared…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |