Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold the Rear and Front Seats on a Citroen C3 Aircross

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Seat

To fold the rear and front seats on a Citroen C3 Aircross, first press the lever located on the backrest of the seat, move the seat forward and rest it on the seat base. Pull the metal lever located at the back of the seat base, grasp the seat and rotate it forward. Repeat the same steps on the front seat, performing the previously mentioned manoeuvres. Now that you have flattened the boot of the car, you can load the desired volume of items lengthwise.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seat of a Citroen C3 Aircross
How to Fold Down the Rear Seat of a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Before you can start, open the rear door of your Citroen C3 Aircross. Begin by pulling towards you the latch located at the lower outer corner of the…
How to Fold Down the Rear Seats on Citroen C3 Aircross
How to Fold Down the Rear Seats on Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Here’s how to fold down the rear seats on a Citroen C3 Aircross to create space in the cabin. First, press the lever located on the backrest of the s…
How to Lower the Seats in a Citroen C3 Aircross
How to Lower the Seats in a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Learn how to lower the rear seats in the new Citroen C3 Aircross to create more space in the cabin. First, press the lever located on the backrest of…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos