Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on a Citroën Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Service warning light

You can completely make the Service light that appears on the instrument panel of the Citroën Berlingo disappear by turning on the instrument panel and holding down the button located on the right side of the instrument panel. While holding this button, you will be able to reset the number displayed to zero. Then, you need to turn off the instrument panel and, while still holding the same button, turn the key to turn the instrument panel back on. A countdown will appear, and when it reaches zero, it will confirm that the corresponding light has been reset.

Posted on 31 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Citroen Berlingo service light
How to reset the Citroen Berlingo service light
Citroen Berlingo (2018-2026 / MK 3) The procedure required to correctly reset the Citroen Berlingo service warning light is really simple and can be easily performed by anyone, even in …
How do you reset the Service light on a Citroën Berlingo?
How do you reset the Service light on a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) On the instrument panel of the Citroën Berlingo, it will be possible to completely turn off the Service light by pressing and holding the button loca…
How to reset the service indicator on the Citroen Berlingo 3
How to reset the service indicator on the Citroen Berlingo 3
Citroen Berlingo (2018-2026 / MK 3) If you do not know how to manually reset the service light on your third-generation Citroen Berlingo, do not worry because below you will find a desc…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos