Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlight bulb on a Citroen Jumpy

Model: Citroen Jumpy MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will go through the steps and instructions that will allow us to dismantle and replace the dipped beam bulb of the front headlight on a Citroen Jumpy. First, open the bonnet of the vehicle and start unscrewing the fixing screws of the headlight, disconnecting the electrical connector of the bulb to remove it; then remove the plastic protective cap and unclip the metal spring to remove and replace the bulb, as shown in the video.

At this point, install the new dipped beam bulb, ensuring it has the same fitting, and finally reassemble the headlight unit!


Posted on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Citroën Jumpy
How to Replace the Headlight Bulb on the Citroën Jumpy
Citroen Jumpy (1994-2007 / MK 1) To replace the headlight bulb on the Citroën Jumpy, open the bonnet to access the engine compartment. This will allow you to remove the protective ca…
How to Remove the Headlamp Unit of the Citroen Jumpy
How to Remove the Headlamp Unit of the Citroen Jumpy
Citroen Jumpy (2007-2016 / MK 2) In this video, see how to replace the headlamp bulb of a Citroen Jumpy: open the front bonnet and remove the screw located at the top of the headlamp…
How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …

Other guides you may be interested in

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos