Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Citroën Jumpy

Model: Citroen Jumpy MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Light bulb

See other generations:
Video tutorial

To replace the headlight bulb on the Citroën Jumpy, open the bonnet to access the engine compartment. This will allow you to remove the protective cap located inside the headlight.

Once removed, you can extract the bulb from its housing and disconnect it from the relevant connector. After the old bulb has been disconnected, replace it with a new spare part.

This should be connected to the connector and inserted back into the designated housing; after installation, you can reinsert the rear cap of the headlight.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Replacing the headlight bulb on a Citroen Jumpy
Replacing the headlight bulb on a Citroen Jumpy
Citroen Jumpy (2007-2016 / MK 2) Today, we will go through the steps and instructions that will allow us to dismantle and replace the dipped beam bulb of the front headlight on a Cit…
How to Remove the Headlamp Unit of the Citroen Jumpy
How to Remove the Headlamp Unit of the Citroen Jumpy
Citroen Jumpy (2007-2016 / MK 2) In this video, see how to replace the headlamp bulb of a Citroen Jumpy: open the front bonnet and remove the screw located at the top of the headlamp…
How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos