Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlamp Unit of the Citroen Jumpy

Model: Citroen Jumpy MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In this video, see how to replace the headlamp bulb of a Citroen Jumpy: open the front bonnet and remove the screw located at the top of the headlamp, using an extension. With the same extension, reach into the front grille to remove the bolt located on the inner side.

If there are no further issues from rust, at this point, pull the headlamp unit towards you, being careful of the clip located on the outer side of the headlamp, which is a snap fit, as shown by the YouTuber. Now, simply disconnect the electrical connector, and the headlamp unit has been removed from its housing.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box of the Citroen Jumpy II
Where is the Fuse Box of the Citroen Jumpy II
Citroen Jumpy (2007-2016 / MK 2) In this guide dedicated to all of you who own a Citroen Jumpy second series (2007-2016), we will discover where the fuse box containing all the vario…
How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
Where is the fuse box located in the cabin of the Peugeot Jumpy 3?
Where is the fuse box located in the cabin of the Peugeot Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) If you own a third series Citroen Jumpy and want to find out where the fuse box in the cabin is located, then all you have to do is read the followin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos