Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Fan on C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Is the air fan on your Citroen C4 Picasso damaged? Here’s how to remove it. Use a lever to detach the plastic cover under the front dashboard: unscrew the securing screws of the ventilation fan with a screwdriver. Disconnect the power connector, then pull it out from its compartment.

Insert a new fan and screw in the securing screws (connect the power connector). Refit the cover and tighten the screws (if present).

Check the correct installation of the previously fitted parts. Turn on the ignition and test the fan's operation.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …
Replacement of the interior light fixture of the Citroen C4 Picasso.
Replacement of the interior light fixture of the Citroen C4 Picasso.
Citroen C4 Picasso (2013-2022 / MK 2) These short and simple steps will show us how to disassemble and replace the interior light fixture of the Citroen C4 Picasso. First, we climb aboard…
How to Replace the Cabin Air Filter on a Citroen C4 Picasso
How to Replace the Cabin Air Filter on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you are unsure how to replace the cabin air filter in your first-generation Citroen C4 Picasso, don't worry as we will explain how to do it. First…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos