Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Reverse Switch

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Reverse light switch

To replace the reverse switch, you must remove the battery as the switch is located on the gearbox, just beneath the battery: open the front bonnet, remove the plastic cover from the battery compartment, disconnect the terminals, and take out the battery. At this point, locate the switch (it is near the support pin), disconnect the connector, and unscrew it. Then, fit the new switch ensuring it is tightened correctly, reconnect the plug, and refit the battery.

Updated on 8 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Rear Headlight Bulbs on Citroen C2
Replacing Rear Headlight Bulbs on Citroen C2
Citroen C2 (2003-2010 / MK 1) Let's see how to remove and replace the bulbs of the rear headlight on a Citroen C2 by following these simple instructions. First, open the boot lid …
Instructions for Removing the Heater Radiator on Citroen C2 - Peugeot 206
Instructions for Removing the Heater Radiator on Citroen C2 - Peugeot 206
Citroen C2 (2003-2010 / MK 1) In this tutorial, you will find instructions for removing the cabin heater radiator on a Citroen C2, as well as on a Peugeot 206. First, open the bon…
How to Replace the Radio in a Citroen C2
Citroen C2 (2003-2010 / MK 1) In today's tutorial video, you will learn how to remove and replace the standard radio in a Citroen C2, following the instructions below. First, get …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos