Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Citroen DS5

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Door trim panel

In this video tutorial, you will learn how to remove the front door panel on the Citroen DS5 by following these simple steps. First, open the front door and start by removing the plastic cover found under the handle; then unscrew the screws located underneath using a Torx screwdriver, as shown in the video. At this point, lever the sides of the panel to unclip and remove it, disconnecting the handle cable located at the back; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Door Handle of the Citroen DS5
Citroen Ds5 (2011-2019 / MK 1) In today's tutorial video, you will learn how to remove and replace the external door handle of the Citroen DS5, as well as most models from the Citr…
How to remove the external handle of the rear door in the Citroen DS5?
How to remove the external handle of the rear door in the Citroen DS5?
Citroen Ds5 (2011-2019 / MK 1) In this tutorial, we can see how to disassemble the external handle of the rear door in the Citroen DS5, an extremely simple and quick operation. Fir…
Replacement of the cabin fan and resistor of the Citroen DS5
Replacement of the cabin fan and resistor of the Citroen DS5
Citroen Ds5 (2011-2019 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the cabin fan and resistor of the Citroen DS5. First, we op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos