Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the rear light bulb on a Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Rear light bulb
Operation: How to replace the rear light bulb on a Citroen C3?

This video tutorial explains very clearly how to remove the rear light of our Citroen C3 to replace the bulbs. To perform this work, and therefore to access the rear light, we will need to open the trunk. First we open the cover inside the trunk. Next, we take out the small cover cap of the top bulb. At this point, we will be able to unscrew the two fixing nuts of the headlight. Once this is done, we will have to extract the headlight, disconnect the connector and remove the support plate of the bulbs. Finally, we rotate the bulbs to the left for a quarter of a turn and extract them. To insert the new bulbs and reassemble everything, we follow the same steps of the disassembly phase but in reverse.


Posted on 19 March 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - How many reversing lights does the Citroen C3 have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos