Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirrors of a Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Side mirror

See other generations:
Video tutorial

Before you can start, open the door. Begin by removing the door panel, unscrewing the side screws that hold it in place with a Torx T20 screwdriver.

Once done, remove the cover of the internal handle, under which there will be more screws to remove with a Torx T30 screwdriver. After removing these screws, proceed to unclip the panel using a thin but sturdy tool.

Once the panel is removed, disconnect the two connectors attached to the mirror. Next, disengage the plastic cover located in the corner near the mirror.

This will reveal three screws that hold it in place, which you will remove with a Torx T20 screwdriver. Once all three screws are removed, you can extract the mirror from its housing, taking care with the connectors.

Once this step is complete, you will have successfully disassembled the mirror.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Lights on the Mirrors of a Citroen C3?
How to Replace the Indicator Lights on the Mirrors of a Citroen C3?
Citroen C3 (2009-2016 / SC) In this tutorial, you will see how to replace the indicator lights on the wing mirrors of a Citroen C3, a very simple and quick operation. First, ens…
Where is the fuse box located in the Citroen C3?
Where is the fuse box located in the Citroen C3?
Citroen C3 (2009-2016 / SC) The 2016 Citroen C3 has two fuse boxes inside it. The first fuse box is located under the front hood, specifically next to the battery. The second fu…
How to Remove Airbags from a 2012 Citroen C3?
How to Remove Airbags from a 2012 Citroen C3?
Citroen C3 (2009-2016 / SC) Deciding to remove the airbags from your vehicle may have valid and serious reasons, whether for restoration, replacement, etc. The tools required ar…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos