Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the injectors of the Citroen C4 Picasso 1.6 HDI

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Fuel injectors

Today we will see, in this video tutorial, how to remove and replace the injectors of the Citroen C4 Picasso, with 1.6 HDI engine. First we open the engine hood and remove the upper engine protection; after which we unscrew the screws of the air filter cover to remove it, also disconnecting the suction sleeve, as shown in the video. At this point we disconnect the electrical connectors of our injectors, located above the cylinder head; then we use a socket wrench with extension to unscrew the bracket screws, then remove and replace the injector with the new one.

Posted on 21 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery for the Citroen C4 Picasso 1.6 HDI
Replacement of the battery for the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2006-2013 / MK 1) Today we will discover the instructions that will allow us to replace the battery of the Citroen C4 Picasso 1.6 HDI. First, let's open the car's hood…
Guide to replacing the air filter of the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2006-2013 / MK 1) In this guide, we will see the procedure for disassembling and replacing the engine air filter of the Citroen C4 Picasso 1.6 HDI. First, we open the …
Replacement of the gear lever cable for the Citroen C4 Picasso 1.6 HDI.
Replacement of the gear lever cable for the Citroen C4 Picasso 1.6 HDI.
Citroen C4 Picasso (2006-2013 / MK 1) In this video tutorial, we will see how to disassemble and replace the cable of the gear lever of the Citroen C4 Picasso 1.6 HDI. First, we open the …

Other guides you may be interested in

How to Replace a Damaged Wheel on a Nissan Qashqai

Learn how to replace a damaged wheel on a Nissan Qashqai: open the boot and take the wheel removal kit which includes: jack, jack lever, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack lever and unscrew the nuts, then remove the damaged wheel. Fit the spare wheel onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit back in the boot.

Watch the video!


by ScegliAuto

More videos