Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear lever cable for the Citroen C4 Picasso 1.6 HDI.

Model: Citroen C4 Picasso MK 1 - Years 2006-2013

In this video tutorial, we will see how to disassemble and replace the cable of the gear lever of the Citroen C4 Picasso 1.6 HDI. First, we open the engine hood of our car and begin to disassemble and remove the battery, disconnecting both terminals. This way, we can access the cable connected to the transmission box, disconnecting it from it, as shown in the video. All that remains is to disconnect the cable from the gear lever. To do this, we remove the boot and the plastic partition located below it, removing and replacing the cable along with its sheath!


Posted on 21 November 2023 by ScegliAuto



How to replace the gear shift knob and boot on a Citroen C4 Picasso.
Citroen C4 Picasso (2006-2013 / MK 1) In this short and simple guide, we will see how to disassemble and replace the gear shift knob and boot of the Citroen C4 Picasso, following the inst
When and how to change the timing belt on the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2006-2013 / MK 1) In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the timing belt of the Citroen C4 Picasso 1.6
Replacement of the Citroen C4 HDI wax bag
Citroen C4 Picasso (2006-2013 / MK 1) Let's see in this guide the instructions that will allow us to disassemble and replace the bag of the wax for the reduction of CO2 polluting emission

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos