Do it yourself
Frequently asked questions about cars and motorcycles

How to change the air filter of the Citroen C4 Picasso 1

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

In this video we see how to change the air filter of the Citroen C4 Picasso 1: to access the filter it is necessary to unscrew the brake fluid reservoir with an 8 mm wrench; we unscrew the two screws and gently move the reservoir to one side. We remove the engine cover, and disconnect the air inlet duct, disconnect the turbocharger tube by loosening the clamp with a flathead screwdriver and then with pliers, take the two ends of the support ring to unlock it. Disconnect the electrical connector of the airflow meter, then unscrew the three screws of the air box; we should not try to remove them, as they are designed to remain screwed to the cover.

Lift the cover, remove the filter, clean the container well, insert the new filter, paying attention to the mounting direction, reassemble the cover, the airflow meter connector, the turbocharger duct, the main air inlet duct, put back the engine protection and reposition the brake fluid reservoir.

Operation completed.


Posted on 11 November 2025 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) If it's time to replace the engine air filter of your Citroen C4 Picasso first series, but you don't know the steps to follow to complete the operati…
Citroen C4 Picasso (2006-2013 / MK 1) If you are unsure how to replace the cabin air filter in your first-generation Citroen C4 Picasso, don't worry as we will explain how to do it. First…
Citroen C4 Picasso (2013-2022 / MK 2) In this video, see how to replace the air filter on a Citroen C4 Grand Picasso. Start by removing the engine cover and the air intake manifold. Unscr…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos