Do it yourself
| ||||
|
Citroen C3 - Video tutorial
Model: Citroen C3
FN, FC
- Years 2002-2009 To replace the Citroà «n C3 headlight bulb, you have to open the hood to access the rear part of the headlight. Here will be the connector connected to the old bulb: by disconnecting this connector, it will be possible to remove the old bulb from inside its housing, so that it can be replaced with a new spare part. The new bulb must then be connected to the connector and inserted into its housing inside the headlight. This way, you can close the hood and check that everything is working.
Posted on 14 September 2022 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |