Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp on a Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

This video explains how to change the front bulbs on a Berlingo 2. First, open the bonnet to access the headlamp bulbs. As shown in the video, remove the cover from the grille side, grasp the black electrical connector, and pull it out. This exposes the bulb, which must be pushed and simultaneously turned to the right to detach the retaining tab. Once the old bulb is removed, insert the new one, ensuring it is oriented correctly.

Finally, refit the components that were previously removed and close the bonnet.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Citroen Berlingo (2008-2018 / MK 2) To remove the front headlamp of the Citroën Berlingo, open the bonnet to access the screws securing it from the top. Once these screws are loosened, …
Citroen Berlingo (1996-2013 / MK 1) Removing the front headlamp on a Citroën Berlingo involves loosening all the screws that secure the front bumper: these screws are located at the top…
Citroen Berlingo (2008-2018 / MK 2) Today’s steps will show you how to remove and replace the front headlamp unit on a Citroen Berlingo, following the instructions below. First, open th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos