Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Folding and Heated Wing Mirrors on a Citroen C4

Model: Citroen C4 MK 3 - Years 2020-2026
Part: Side mirror

To fit the folding and heated wing mirrors on the Citroen C4, first obtain the mirror kit. Various options are available on e-commerce platforms, costing from £130 each plus shipping. The kit includes the motor, connectors, is heated, folding, and has all the described features. You can reuse your switch panel. First, remove the door panel, which is held by three Torx screws. Before that, remove the switch panel, secured by a single screw. You will also need to remove the speaker bracket. Disconnect the old mirror and all its connectors. Remove the motor and replace it with the one from the new mirror kit. Take off the mirror to be replaced; there are just two fairly large screws. Fit the motorised mirror, tighten it, run the new cable, and connect the black and brown wires to the motor. Be careful when routing the cables to pass them in front of the glass; otherwise, the glass may cut them. Refit the panel, then the switch panel. To adapt the button, you will need to cut a small piece of plastic inside the wing mirror control button, and everything will work perfectly.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2004-2010 / MK 1) In this guide we will see the positioning of the fuse boxes and how to find their diagram on the Citroen C4. First of all, we open the hood of the ca…
Citroen C4 (2004-2010 / MK 1) Let’s explore the information regarding the fuse diagram and placement for the Citroen C4 1.6 HDi. First, open the bonnet of the vehicle and start by…
Citroen C4 (2004-2010 / MK 1) The fuse box in the cabin is located on the left side of the steering wheel at the lower part of the dashboard. To access it, open the cover. The fus…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos