Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Lever on a Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Shifter boot

In this video, you will see how to replace the gear knob and gaiter on a Citroen C5: start by removing the gaiter from its housing by gently pulling it upwards. Remove the ring that holds the gaiter to the knob, then pull the knob off from the top. For replacement, you can follow the youtuber's instructions, but we want to offer you an alternative: the code B09G74JH2M on Amazon for £14.99, with free delivery for Prime customers; moreover, it arrives already assembled, so there's no need to waste time putting it together with a clip. Simply place the knob on the shaft and gently pull down. At that point, just position the plastic square correctly in its place and you're done.

Updated on 3 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Gear Knob on the Citroen C5
How to Replace the Gear Knob on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Today, discover the procedure to remove and replace the gear knob on the Citroen C5 in simple steps. First, get inside the vehicle and disconnect the…
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Cit…
How to Change the Brake Light Bulbs on the Citroen C5
How to Change the Brake Light Bulbs on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video tutorial, you will see how to replace the bulbs in the rear light of the Citroen C5 by following the instructions below. First, open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos