|
Do it yourself
| |||
| ||||
Removal and Replacement of Front Shock Absorbers
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013
Place the car on a ramp or lift it with a jack on the side of the affected wheel. Remove the wheel and lubricate the bolts to be undone. After disconnecting the wishbones by undoing the appropriate bolts, also undo the bolts that secure the shock absorber in place (first the bottom, then the top mount). To undo the top bolt, open the bonnet and locate it corresponding to the shock absorber. First, remove the plastic cover near the windscreen by manipulating the various clips that hold it in place. Once the shock absorber is removed, use the appropriate tool to compress the spring so that you can then disassemble the shock absorber. Replace the spring and refit the shock absorber. At this point, you can mount it back onto the car by following the reverse order of the operations performed. The maintenance operation shown in the images was carried out on a Citroën C4 Picasso.
Updated on 20 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2006-2013 /
MK 1)
Today we will discover the steps on how to disassemble and replace the front windshield wiper motor of the Citroen C4 Picasso. First, we open the car…
Citroen C4 Picasso
(2013-2022 /
MK 2)
In this tutorial we can see how to replace the front headlight bulbs in the Citroen C4 Picasso, an extremely simple and quick operation. First of all…
Citroen C4 Picasso
(2006-2013 /
MK 1)
In this tutorial, we can see how to replace the front headlight bulbs in the Citroen C4 Picasso, an extremely simple and quick operation. First of al…
Other guides you may be interested in
|
How to replace the horn on a Renault Duster - Dacia Duster
Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.213
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |