Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time on the Citroen Jumper van?

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Clock

In this tutorial, we can see how to adjust the time in the Citroen Jumper van, an extremely simple and fast operation, to be carried out, for example, after the battery has been drained or after the switch to daylight saving time. First of all, let's go inside the vehicle, then press the "MODE" button located on the left console of the dashboard and, using the directional arrows, reach the "Hour" screen. Then, enter the section by pressing the same button, adjust both the hour and the minutes, and save the setting by returning to the main screen.

Posted on 8 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock in the Citroen Jumper?
How do you set the clock in the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) The Citroen Jumper is a light commercial vehicle, also known as a van. In its instrumentation there are several pieces of information that can be con…
How to set the date and time on the Citroen Jumper
How to set the date and time on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) Today's instructions will show us how to change the time on the Citroen Jumper, following the instructions below. First, we get into the car and star…
How to adjust the time in the Citroen Jumper
How to adjust the time in the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) In today's video we see how to adjust the time and date in the Citroen Jumper. This tutorial also applies to the twin Fiat Ducato and Peugeot Boxer m…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos