Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Battery Located in the Citroen Jumper Van?

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

In this video, we can see where the battery is located in the Citroen Jumper van and how to proceed if we need to replace it. As shown, it is not positioned in the classic engine bay housing but rather inside the cabin, precisely underneath the mat on the passenger side.

To access it and subsequently remove it, simply unscrew the indicated plastic screws with a flathead screwdriver, lift the entire panel, and starting from the negative terminal, disconnect both terminals.

Once the upper securing bar is removed, you can extract the battery from the housing, position the replacement, and follow the reverse procedure.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Where is the cabin filter located in the Citroen Jumper van and how to remove it?
Where is the cabin filter located in the Citroen Jumper van and how to remove it?
Citroen Jumper (2006-2014 / MK 2) In this video, you can see where the cabin filter is located in the Citroen Jumper van and how to remove it, allowing you to clean or replace it dire…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
How to Set the Time in a Citroen Jumper Van?
How to Set the Time in a Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) In this tutorial, you will learn how to set the time in a Citroen Jumper van, a very simple and quick operation to perform, for example, after a flat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos