Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin filter located in the Citroen Jumper van and how to remove it?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you can see where the cabin filter is located in the Citroen Jumper van and how to remove it, allowing you to clean or replace it directly. It is located just behind the glove compartment on the passenger side.

To access it, first open the drawer, then unscrew all the screws along the inner perimeter and remove the entire compartment from the dashboard. Once this is done, open the long rectangular cover by unscrewing the two screws and extract the filter from its housing.

After inserting the replacement, follow the reverse procedure to reassemble everything.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Where is the Battery Located in the Citroen Jumper Van?
Where is the Battery Located in the Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this video, we can see where the battery is located in the Citroen Jumper van and how to proceed if we need to replace it. As shown, it is not pos…
Where are the radio fuses located in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) If the radio in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the location …
How to Replace the Diesel Filter in a Citroen Jumper Van?
How to Replace the Diesel Filter in a Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) In this tutorial, you will learn how to replace the diesel filter in a Citroen Jumper van, a very simple and quick operation. First, open the driver'…

    Frequently Asked Questions

    • Jumper 2014-2024 - Where is the cabin air filter on Citroen Jumper? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos